Great Outdoors TG475-2 Assembly And Owner's Manual

14, 4. For each mounting bracket, insert a M5 screw. Tighten all four screws securely. Rear Castors Front Locking Castors Front Cabinet Frame Rear Cabinet Frame Assembly Step 4—Install the Grill Head USE HARDWARE ‘STEP 4’ M5 x 10mm (10) 14 Burner Box Mo…

7, The L.P. gas cylinder must have a shut-off valve terminating in a Type 1 L.P. gas- cylinder-valve outlet. A Type 1 compatible cylinder with a Type 1 cylinder valve has a positive seating connection that does not permit gas flow until a positive seal has been obtained. The cylinder…

20, LOCATE THESE PARTS Drip Tray Drip Tray Receptacle Drip Bracket Assembly Step 10—Install the Drip Pan Left Side 20 4. Install battery into ignitor on front console. 1. Insert the drip tray receptacle into the bracket. 2. Clip the bracket into the hole in the d…

12, Great Outdoors TG475-2 Assembly Step 2—Cabinet Assembly USE HARDWARE ‘STEP 2’ M5 x 10mm (6) M3.5 x 10mm (8) B A Upper Door Brackets Front Cabinet Frame Rear Cabinet Frame Bottom Cabinet Panel Lower Door Brackets LOCATE THESE PARTS A Front Cabinet Frame Rear Cabinet F…

15, Assembly Step 5—Assemble the Side Burner Side Burner Valve Align the bracket to the front edge USE HARDWARE ‘STEP 5’ M3.5 x 10mm Self Tapper (2) No.6-32 UNC (2) C B A M5 x 12mm (4) LOCATE THESE PARTS Side Burner Valve Right Side Burner Shelf Right Side Table …