GTO RB909 Installation Manual

6, 5 Step 1: With the gate in the closed position, determine the best location for the lock and lock receiver. The lock and receiver must be level and aligned with the opener. Also, the lock should have a solid surface or cross member to provide stability. Step 2: Clamp receiver and lock togeth…

9, 8 Step 1. Turn control box power switch OFF and unplug the transformer or disconnect the solar panel. Remove control box cover and disconnect battery lead wires from the battery terminals before wiring the lock board to the opener control board. Step 2. Connect the WHITE wire (included) to Ter…

8, GTO RB909 7 RED Wire To Battery Positive (+) Terminal RED Wire From Lock BLACK Wire From Lock WHITE Wire to BLACK on Operator Terminal BLACK Wire To Battery Negative (–) Terminal 1 2 345 Lock Board Double Spade Connector Double Spade Connector RED Wire To Battery Positive (+) Terminal B…

12, 11 Wiring the Lock to Mighty Mule FM-700/702 and GTO/PRO 1000 and 2000 Gate Opener Control Boards 12 Volt Battery Double Spade Tongue Connectors 15 15 DER KLB NRG GRO LB U DER KLB NRG GRO LB U FIRST OPERATOR SECOND OPERATOR DER KCALB NEERG EGNARO LB EU DER KCALB NEERG EGNARO LB …

1, 13 PLEASE NOTE: Because of the various mounting applications, no mounting hardware is provided with the GTO Automatic Gate Lock. All necessary mounting hardware can be obtained from your local hardware store; all other hardware is provided. This manual shows two examples of the most…