GTO SW-4000XL Installation Manual

26, 22 OPTIONAL Solar Panels and Gate Activity Powering the System Step 1 Make sure the power switch is OFF before proceeding to the next step. Step 2 Select the electrical outlet into which you will plug the transformer. Measure the distance from this outlet to the control box following the path…

14, 10 Depending on the type of gate and fence post, you may need some additional materials/hardware. Some of these items can be found in the GTO/PRO Accessory Catalog. • Low voltage wire may be needed. Length depends upon the distance between the transformer power supply and the control …

44, 40 If you have a question about GTO/PRO accessories just call 1-800-543-GATE! ACCESSORIES The contents of all material available on this installation manual are copyrighted by GTO, Inc. (“GTO”), unless otherwise indicated. All rights are reserved by GTO, and content may not be reproduced,…

29, 25 1 2 3 4 ON DIP STAT US LEARN RMT LEARN MAST LIMIT LEARN SLV LIMIT S3 S4 S2 OFF SOFT START OFF WARNING OFF OPEN PULL SLV OPEN DLY. MODE1 OFF MODE2 OFF ON ON PUSH SIMULT. ON ON 120 MINMAX AUTO CLOSE TIME STALL F…

11, GTO SW-4000XL 7 IMPORTANT SAFETY INSTRUCTIONS ! Wa rning signs (4 enclosed) to be installed on each side of the gate (3–5 feet above the bottom of the gate). Maximum Gate: 1000 lb. (453.5 kg); 20 ft. (6.1 m) Voltage: 12 Vdc; Frequency: 0 Hz; Power: 60 W Class I, II, III and IV Vehicular Swing Gate Operator. Se…