GW Instek GDM-8200A Series Operation & User’s Manual

60, GDM-8200A Series User Manual 60 1. Activate external trigger Press the Shift key followed by the TRIG key. The EXT indicator appears on the display. 2. Start trigger Press the TRIG key to start triggering manually. The indicator turns On. Reading indicator …

69, GW Instek GDM-8200A Series STORE/RECALL 69 Save Instrument Settings Background The GDM-8200A series can save up to ten instrument settings. The settings can save the state, function, I/O and range. Upon powering up, the current instrument setting is displayed. Set Instrument Setting Pr…

105, REMOTE CONTROL 105 *ese <0~255> Sets ESER contents. Example: *ese 65 sets ESER to 01000001 *esr? Returns and clears SESR (Standard Event Status Register). Example: 198 means SESR=11000110 *idn? Returns company name, model No., and system version. Example: GW, GDM8255A, 1.0 *opc…

91, DIGITAL I/O 91 Application: Compare measurement Applicable to Background Compare measurement checks and updates if the measurement data stays between the upper (high) and lower (low) limit specified. 1. Activate Compare measurement Press the Shift key, then the…

72, GDM-8200A Series User Manual 72 GDM-SC1 Scanner Specifications 2-wire channel 16 pairs Maximum current 2A (ch17, ch18) 4-wire channel 8 pairs Resistance 2/4 wire Single wire channel N/A Cold junction N/A (internal) Maximum voltage 250V Connection Screw terminal Scanner In…

56, GDM-8200A Series User Manual 56 2W* (see Note)      Hz/P      °C/°F — — — — — / — — — — — Note In the dual display mode, the resistance needs to be larger than 1MΩ. Some combination of dual display mode is pos…