HAGENUK EuroPhone Basic 10 Operation & User’s Manual

50, 4.7 Automatic keypad switchover The automatic keypad switchover function serves to send telephone numbers that begin with “*“ or “#“ as keypad signals. This function is sometimes needed in telecommunications systems. Some telecommunications systems or switching computers can be …

51, 4.9 Programming a direct call number (baby call) When the direct call function is activated, a previously programmed tele- phone number is dialled if you press any key (except s) after lifting the handset. You need to know the PIN to be able to enter the direct call number. The &apos…

64, 4.22 Telephone book A maximum of 200 entries with 30 characters each for telephone numbers and 14 characters each for names is available. Names that begin with "!" ("!" is assigned to the "0" key) can also be dialled when the telephone lock is on (emergency…

30, HAGENUK EuroPhone Basic 10 3.3.2.2 Clearing an activated callback Initial state: idle, flashing ¤symbol indicates that callback is activated Steps: No. Description Input Display 3.3.3 Three-party conference You conduct a simultaneous conversation with two parties and all three par- ties can hear each other. Init…

22, 3.1.6 Chaining telephone numbers During the course of on-hook dialling telephone numbers from different sources (telephone book, call list, redial) can be combined with one another and/or with manually entered digits. Besides this, you can define the MSNs that are to belong to the …