HAGENUK HomeHandy Pìco Operating Instructions Manual

21, 194 Further functions The handset is in standby mode. You can access the first/last speed dialling memory immediately via the arrow keys. : 21, : 01 A speed dialling memory can be selected selectively via the follo- wing procedure: Press the speed dialling key. The phone number is selected …

5, HAGENUK HomeHandy Pìco 31 Getting acquainted with and connecting the HomeHandy Pìco 1.1 Introduction The HomeHandy Pìco is a cordless telephone in line with the DECT-GAP standard. It consists of a handset and a base station in which a charging facility for the batteries is integrated. Additional charg…

31, 29 Now press the OK key. The log- in procedure can take a few seconds. Enter one of the displayed free numbers as an (internal) phone number for the new handset. Terminate the log-in procedure by pressing the OK key. 2. Necessary preparation of the base: Disconnect the base station from the…

26, 24 4 Further functions The handset is in standby mode within the range of a connected base: Press menu key. Press OK key. Select ”SYSTEM”. Press OK key. Select ”PROG. PIN”. Confirm with OK key. Enter current PIN (0 0 0 0 in dispatch state), each digit deletes a dash ”----…

41, 39 the apparatus you have connected before, provided that you have paid attention to the rule that the sum of all RENs may not exceed four. Other- wise it is not guaranteed that all apparatus will ring correctly. c) You can use the HomeHandy Pìco on PSTN lines with loop-disconnect…

33, 317 Operation via a telephone system ( ) 7.2 Extending a call / consultation hold within a telephone system During a call: Press the signal key. Dial the number of the desired extension. Extending: Announce the call and press the ”ON/OFF” key when the other extension has answered; the call…