HAI SIA CP-01 Owner's Manual

74, 66 Notes: 1. When configured, the House Code will affect 2 rooms of HLC lighting (i.e. HC 1 ALL OFF affects Room 1 and 2). 2. When the House Code is configured as UPB, RadioRA, or CentraLite, “House Code All Off” does not affect the state of the installed devices; however, i…

58, 50 3 = Delete All Programs To delete All automation programs, from the Set Up Program menu, press the 3 (DELETE) key. The display will prompt you to confirm the deletion. DELETE ALL PROGRAMS? 0=NO 1=YES Select 1 (YES) to delete all automation control programs in the s…

53, 45 What You Hear - If Your OmniLT Calls You When you pick up the phone and say something, the OmniLT will say: (One of the following, depending on type of alarm) - BURGLAR ALARM - FIRE ALARM - AUXILIARY ALARM - TEMPERATURE ALARM - WATER ALARM - GAS ALARM - SI…

48, 40 Pro-Link also has the capability to monitor the serial port for incoming text messages. When a text message is received, Pro-Link searches through all 16 messages for a matching message. If one is found, the Program Command (macro) corresponding to the matching message…

29, 21 ¾ 5 (RMP) does not affect CentraLite units. ¾ Press 9 (TIM) to time the selected unit (On or Off). Timed commands may be from 1-99 seconds, 1-99 minutes or 1-18 hours. ¾ Press # (STA) to see the status (On or Off) of a CentraLite device. Controlling RadioRA Units Entry Light…

55, HAI SIA CP-01 47 You can specify the access (on/off) times for the code, this is, the time periods during which the code is valid. CODE X ON TIME: 8:00 AM MTWTF-- #=CHNG CODE X OFF TIME 5:00 PM MTWTF-- #=CHNG The times and days are changed by pressing the ' # &…