ParaBody 813102 Assembly Instructions Manual

3, ParaBody 813102 PART# DESCRIPTION 1 6102303 BASE CONNECTOR 2 6480003 " CHINBAR 3 6480503 : ...... VKRSIDE 4 6480903 UPPERBACK SUPPORT ¯ 5 6665902 - BACKPAD 6 6752702 ARM PAD 7 310250 1 3/8" FLAT WASHER 8 3102601 3/8" LOCK WASHER 1 2 34 6 PART# 2 9 3102802 1 10 3102904 2 11 3103101 12 3103103 &…

2, [IMPORTANT NOTES] WELCOME TO THE WORLD OF Please note: * Thank you for purchasing the Parabody 813102 VKRJCHIN/DIP. Please read these instructions thoroughly and keep them for future reference. This product must be assembled ¯ on a flat, level surface toassure its proper fu…

5, FIGURE 3 STEP 3: ¯ LOOSELY assemble the CHIN BAR (2) to the VKR SIDES (3) using two 3/8 X 3" BOLTS (10), four 3/8" WASHERS (7), and two 3/8" LOCK NUTS. ¯ SECURELY tigten all connections made up to this point. …

7, 3/8 X 3" FIGURE 5 STEP 5: ¯ SECURELY assemble the BACK PAD (5) to the UPPER BACK SUPPOI~.T (4) using two 3/8 X 3" BOLTS (1 two 3/8" LOCK WASHEP~S (8), two 3/8" FLAT WASHERS (7) as shown in FIGUR~ …

6, FIGURE 4 // STEP 4: SECURELY attach two ARM PADS (6) to the VKR SIDES (3) using four 3/8 X 3" BOLTS (10), four 3/8" WASHERS (8), and four 3/8" FLAT WASHERS (7) as shown in FIGURE 4. (NOTE: Place the high side of A1LM PAD toward the outside.) 1/2 I 1/2 I 1/2 I 1/2 I 1/2 ] 1/2…