Paradyne 392xPLUS Installation And Operation Manual

187, Paradyne 392xPLUS COMSPHERE 392xPlus Modems 5-2 November 1996 3920-A2-GN31-30 Escape Sequence and Escape Guard Time The escape sequence is only issued when the modem is online and in Data mode. The 392xPlus modems use three consecutive plus ( + ) characters as the escape sequence. (To change this valu…

142, DCP Configuration 4-253920-A2-GN31-30 November 1996 Table 4-4 (2 of 3) Leased Line Configuration Options — Multiport Mode l V32bis Override: Disable Nxt Disable 2400 This configuration option is ignored unless Leased-Line Rate is 4800(V32b). V.32bis Override. Activates the Paradyne Poi…

159, COMSPHERE 392xPlus Modems 4-42 November 1996 3920-A2-GN31-30 Table 4-8 (2 of 5) DTE Dialer Configuration Options — Singleport Mode A AT Escape Char: 043 ASCI Nxt  043 ASCI This configuration option only appears when DTE Dialer Type is configured for AT. AT Escape Character. The escap…

233, COMSPHERE 392xPlus Modems D-6 November 1996 3920-A2-GN31-30 Command Response A Command Response indicates that the command entered was a valid or invalid entry . Command Response includes V alid (VAL) and Invalid (INV). Valid (VAL) The V AL response indicates that the modem has accepted the V .25b…

77, COMSPHERE 392xPlus Modems 3-40 November 1996 3920-A2-GN31-30 Press the F1 key until the appropriate digital interface appears. Select the appropriate interface by pressing the corresponding function key. After selecting the desired interface, the message Command Complete appears on the…

236, COMSPHERE 392xPlus Modems E-2 November 1996 3920-A2-GN31-30 Table E-1 (2 of 4) ASCII Characters Hexadecimal ASCII V alue Key Control Character Decimal ASCII V alue 17 023 ETB CTRL-W 18 024 CAN CTRL-X 19 025 EM CTRL-Y 1A 026 SUM CTRL-Z 1B 027 ESC CTRL-[ 1C 028 FS CTRL-/ 1D 029 GS …