Paradyne 8540 Network Configuration Manual

116, C-1 8000-A2-GB21-20 November 1997 SNMP Configuration Worksheets C Overview This appendix provides worksheets to assist you in setting up general SNMP configurations for your HotWire DSLAM network, such as defining communities, enabling traps, and preventing unauthorized access to the DSLAM. Use…

63, Paradyne 8540 IP Routing 6-12 8000-A2-GB21-20 November 1997 The following illustration shows the packet flow when ES1 sends to ES3, ES1 and ES3 are in different service domains, and source-based routes are defined for ES1 and ES2 (indicated by the S/D flag). 97-15560-01 Router 155.1.3.1 159.1.3…

68, IP Filtering 7-5 8000-A2-GB21-20 November 1997 Service Security Filtering Scenario The following is an example of filtering to ensure service security: 97-15476-0 2 Router 155.1.2.1 155.1.3.1 NSP1 155.1.2.2 DSL Card* 155.1.3.2 RTU 1* 135.1.3.3 155.1.3.4 ES1 1) 155.1.3.4 2) 155.1.…

100, Network Configuration Worksheets A-21 8000-A2-GB21-20 November 1997 Static Routes Screen A-E-A Prompt Your Configuration Setting 1. Enter 0 or press Return at the Item Number (0 to add new record): prompt to add…

101, Network Configuration Worksheets A-22 8000-A2-GB21-20November 1997 TASK 4: Create a Default Route or Source Route On the Static Routes screen, create a default route or source route for each DSL card (upstream direction). If creating a default route, fill out one worksheet. If creating source …

24, Introduction to the HotWire DSLAM 1-15 8000-A2-GB21-20 November 1997  If WAN-C is a VLAN switch, the WAN must be a layer 2 switching network supporting a Virtual LAN overlay. In this case: — Each NSP would be a member of a different Virtual LAN. — The VLAN switch at the w…