Manual, Quick Installation Instructions for Paradyne 1862 Network Router (1 pages)
Data: UPD 9th January 2024
Paradyne 1862 Network Router PDF Quick Installation Instructions (Updated: Tuesday 9th of January 2024 04:20:33 AM)
Rating: 4.6 (rated by 33 users)
Compatible devices: Hotwire Routers, 6218-I1, 1813, 4200, 6310, FrameSaver FLEX 9623, 2100, iMarc 9550 DS3.
Recommended Documentation:
Text Version of Paradyne 1862 Network Router Manual (Summary of Contents)
(Ocr-Read of Document's Main Page, UPD: 09 January 2024)
1862 VoIP IAD
Quick Installation Instructions
Document Number 1862-A2-GZ10-00
November 2004
Installation
➊ If you will use the USB port, install the USB driver:
– Insert the CD in your CD-ROM drive
– Browse to the USB Driver directory
– Start setup.exe
– Follow the instructions on your screen
➋ Connect the power adapter to the Power jack of the IAD,
then plug the power adapter into an AC wall outlet.
➌ Connect the FXS port of the IAD to your analog telephone with an RJ11 connector cable.
➍ Optionally, connect the USB port of the IAD to a free USB port on your PC with a standard USB cable.
➎ Alternatively, connect the LAN port of the IAD to your PC's Ethernet port, or to an Ethernet switch or hub, with an RJ45 cable.
➏ Connect the ADSL port to the wall outlet, a POTS splitter, or micro filter (consult your service provider), with an RJ11 connector cable.
➐ Turn on the power switch on the rear panel.
Using the Web Interface
Configuration of the Gateway is performed using its integral web interface. To use the web interface, start your Internet browser. Type
the default IP address for the Gateway into the address field: http://192.168.1.101 Enter the default username root and the default
password 1234 when prompted. Your PC must be on the same subnet as the Gateway. See the user’s guide on the CD for details. 1
*1862-A2-GZ10-00*
*1862-A2-GZ10-00*
LAN LINEUSBFXS
PowerOn
Off
04-17597
Power
Switch
AC Power
Input
VoIP Service
USB
PC/LAN
To POTS
Splitter,
Micro Filter
or
Wall Outlet
Copyright © 2004 Paradyne Corporation. Printed in U.S.A.
Recommended:
BH100H, H81I-PLUS, Odyssey, GX900
DSL-N11, XG1200, iM8, 3000, 861-XL1616G, Klick & Show K-10S Kit
-
OmHQuicmanHSPARouckStartaB970‐MoAB9uterandsetu3GRouteThaThismUSBStic©AllRightsNopartoftconsentofOght © 2009 ankyoufomanual briefck� ...
Model & Doc Type: B970 12
-
PTX5000 Packet Transport RouterQuick StartSeptember 2017Part Number: 530-066788Revision 01This document describes how to install the Juniper Networks®PTX5000 Packet Transport Router.ContentsQuick Start Description | 3Step 1: Prepare the Site for the PTX5000 | 4Rack-Mounting Requirements | 4 ...
Model & Doc Type: PTX5000 82
-
Part Number MN-SLM5650A Revision 8 IMPORTANT NOTE: The information contained in this document supersedes all previously published information regarding this product. This manual is subject to change without prior notice. SLM-5650A Satellite Modem Insta ...
Model & Doc Type: Vipersat SLM-5650A 420
-
EC Declaration of Conformity We, the undersigned, Manufacturer: ASUSTek COMPUTER INC. Address, City: No. 150, LI-TE RD., PEITOU, TAIPEI 112, TAIWAN R.O.C. Country:TAIWANAuthorized representative in Europe: ASUS COMPUTER GmbH Address, City: HARKORT STR. 21-23, 40880 RATINGEN Country: GERMANYdeclar ...
Model & Doc Type: DSL-N11 37
Operating Impressions, Questions and Answers:
