Parasound D/AC-1100 HD Owner's Manual

1, -1- O W N E R ' S M A N U A L D/AC-1100 HD Digital to Analog Converter Congratulations on your purchase of this precision audio component and thank you for your selection of Parasound. The D/AC-1100 HD is designed to deliver incomparable musical detail from any digital source. …

2, -2- Connecting Your D/AC-1100 HD When you make connections, be careful to avoid tension on digital and audio interconnects which might cause damage to the connectors or cause them to pull loose. Do not attempt to bend either coaxial or optical digital cables at an angle; this could permanen…

3, -3- Operating Your D/AC-1100 HD Power Switch Push the upper section of the button to turn on; lower section for off. Input Select Buttons and LEDs The four input select buttons correspond to the four input connectors on the rear panel: Coaxial, ST, TOSlink, and AES/EBU. Press any of these butto…

4, Parasound D/AC-1100 HD -4- In Case of Trouble If you suspect a problem with your unit, first recheck all your connections. If one channel is inoperative, the trouble may be caused by another component or even a defective hookup cable. If only one channel remains inoperative, try reversing the left and right cables to …

5, -5- D/AC-1100 HD Specifications Frequency Response: 2 Hz - 20 kHz, I0.25 dB Signal to Noise Ratio: > 108 dB, 113 dB typical Channel Separation: > 100 dB @ I kHz Total Harmonic Distortion: < 0.0015% @ 1 kHz Amplitude Linearity: >100 dB; 102 dB typical Phase Linearity: +…

6, -6- Rewiring for 220-240 V 50 Hz Operation The D/AC-1100 HD can be rewired for operation abroad. Please refer this conversion to a skilled electronics technician to avoid injury or possible harm to the unit. The main power supply printed circuit board has three separate power transformers. Nea…