Patton electronics 1110A Operation & User’s Manual

8, 13 14 APPENDIX D PATTON MODEL 1110A BLOCK DIAGRAM APPENDIX C PATTON MODEL 1110A FIBER OPTIC CABLE DATA The Model 1110A operational distance over multi-mode fiber optic cable may be determined based upon the following measured attenuation values: COMMON ATTENUATION VALUES FOR MULTIMODE F…

5, Switch S1-3: Carrier Control Method The setting for switch S1-3 determines whether the carrier is “constantly on” or “controlled by RTS”. This setting allows for operation in switched carrier or hardware handshaking applications. S1-3 Setting Off Constantly on On Controlled by RTS Switch S…

1, USER MANUAL MODEL 1110A Asynchronous, Carrier Controlled Fiber Optic Modem SALES OFFICE (301) 975-1000 TECHNICAL SUPPORT (301) 975-1007 http://www.patton.com Part# 07M1110A-B Doc# 018051UB Revised 7/18/97 CERTIFIED An ISO-9001 Certified Company …

6, Patton electronics 1110A 4.2 RS-232 CONNECTION Because the Model 1110A is designed to behave as either a DCE or a DTE device, it does not need special cables to operate. Always use a straight-through RS-232 cable. 5.0 OPERATION Once you have configured each Model 1110A properly and connected the fiber and RS-232 c…

2, 1.0 WARRANTY INFORMATION Patton Electronics warrants all Model 1110A components to be free from defects, and will—at our option—repair or replace the product should it fail within one year from the first date of shipment. This warranty is limited to defects in workmanship or mate…

7, APPENDIX B PATTON MODEL 1110A PIN CONFIGURATIONS RS-232 Pin Description (DB-25 Female Connector) APPENDIX A PATTON MODEL 1110A SPECIFICATIONS Transmission Line: Dual optical cable Transmission Mode: Asynchronous, half or full duplex, point-to- point Interfaces: EIA RS-232, CCITT V.24…