Patton electronics 6081RC Application Manual

39, Patton electronics 6081RC Attaching a bridge interface to a VLAN module 37 Models 3224 G.SHDSL IpDSLAM & 6081RC NAS Applications Guide 4 • VLAN bridged connection 2. In the Add VLAN section (see figure 33 on page 36), select the interface that will process VLAN packets from the Parent Interface …

47, 3224/6081RC configuration 45 Models 3224 G.SHDSL IpDSLAM & 6081RC NAS Applications Guide 5 • Routed application using RIP 6. IPCP Restart—Use default. The Restart timer is used to time transmissions of Configure-Request and Ter- minate-Request packets. Expiration of the Restart ti…

32, 3 • Bridged data application Models 3224 G.SHDSL IpDSLAM & 6081RC NAS Applications Guide 30 Interface configuration 7. Configure LCP options as needed or accept the default settings. Do not configure IP and IPCP options. 8. Click on the Submit button to save changes. 9. Repeat the PPP c…

33, Interface configuration 31 Models 3224 G.SHDSL IpDSLAM & 6081RC NAS Applications Guide 3 • Bridged data application 1. Click the check boxes in the Enable column to add a check to the BCP 3 and Bridge entries in the Inter- face column (see figure 27). 2. In the BCP 3 row (see figur…

51, PPP layer configuration 49 Models 3224 G.SHDSL IpDSLAM & 6081RC NAS Applications Guide 6 • Configuring the remote site router 3. At the Options window (see figure 43), enter a creator name and description for the routed link. Figure 43. WAN Connection Options page 4. Click on Edit PPP…

60, 8 • Contacting Patton for assistance Models 3224 G.SHDSL IpDSLAM & 6081RC NAS Applications Guide 58 Introduction Introduction This chapter contains the following information: • “Contact information”—describes how to contact PATTON technical support for assistance. • “Warran…