Patton electronics SIPxNano Quick Start Manual

3, SIPxNano Quick Start Guide 3 4.0 Running the reset script When you turn on the SIPxNano for the first time, you will need to run and configure a reset script before you can access the webpage interface. When you boot the system, a CLI prompt will appear asking for a login and pa…

7, Patton electronics SIPxNano SIPxNano Quick Start Guide 7 NOTES ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ___________________________________…

5, SIPxNano Quick Start Guide 5 A.3 CE Declaration of Conformity We certify that the apparatus described above conforms to the requirements of Council Directive 89/336/EEC, as amended by Directives 92/31/EEC and 93/68/EEC on the approximation of the laws of the member states relating to e…

2, 2 SIPxNano Quick Start Guide 3.0 Before you begin Note The NanoServ chassis is within thermal and design limits but it does run warm. For proper operation and cooling the system must have 2 cm or 1 inch of space for pen air around both side vents. In other words, it cannot be lai…

8, 8 SIPxNano Quick Start Guide NOTES ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________…

6, 6 SIPxNano Quick Start Guide • To prevent shock or fire hazard, do not expose your SIPxNano to rain or moisture. • Never install your SIPxNano in wet locations. • To avoid electrical shock, do not open the case. Contact the fac- tory offices for qualified personnel servic…