Patton electronics 2073RC Operation & User’s Manual

5, 5 1.3 SERVICE All warranty and non-warranty repairs must be returned freight prepaid and insured to Patton Electronics. All returns must have a Return Materi- als Authorization number on the outside of the shipping container. This number may be obtained from Patton Electronics Technical Se…

14, 14 Figure 6. 1001RCM11548C strap locations. Table 4 provides an overview of interface strap functions for the rear interface cards. Following the table overview are detailed descriptions of each strap’s function. DTE Shield (DB-15 Pin 1) & FRGND (JB3). In the connected posi…

11, 11 Figure 4. Orientation of Interface Card Straps The following sections describe the strap locations and possible settings for each rear card. …

4, 4 1.0 WARRANTY INFORMATION Patton Electronics warrants all Model 2073RC components to be free from defects, and will—at our option—repair or replace the product should it fail within one year from the first date of the shipment. This warranty is limited to defects in workman…

7, 7 3.0 CONFIGURATION The 2073RC features configuration capability via hardware DIP switches. This section describes all possible hardware switch configuration. Figure 1 shows the location of the DIP switches on the top of the printed circuit board Figure 1. Model 2073RC top view show…

13, Patton electronics 2073RC 13 DTE Shield (M/34 Pin A) & FRGND (JB3). In the connected position, this strap links M/34 pin A & frame ground. In the open position, pin A is disconnected from frame ground (see Table 2). SGND & FRGND (JB4). In the connected position, this strap links Signal Groun…