Peco WavePRO K2500-001 Operating Manual

19, 19 CUSTOM PROGRAM (CONT.) After the Day/Group of Days are selected, each time period must be programmed for the start time as well as the Heat and Cool Setpoints. Note: Repeat steps 6 through 10 for remaining day(s) and time periods. 6. To select your preference, press PROG once. 7…

10, 10 Figure 1 below illustrates the various display menus in the T2500 display. The menus are: System Mode Display Programming Commands Program Override Commands Temperature Display Time Period Indicators Service Indicator Time & Day Display Fan Operation Indicators THE T2500 DISPLAY …

11, 11 System Mode Display HEAT – Indicates the system is in heating mode. COOL – Indicates the system is in cooling mode. AUTO – Indicates the system will automatically changeover between heating and cooling modes as the room temperature varies. OFF – Turns off the entire system. SETBACK –…

8, 8 Fan Button The FAN button is used to control the fan mode. Pressing FAN will light up the two fan mode options described below. Press FAN to scroll through the options. As you scroll, the “fl ashing” option is automatically selected. The T2500 thermostat times out and automatically…

7, 7 System Button The SYS (system) button is used to control the operating mode of the T2500. Press the SYS button once to light up the menu options, as described below. Continue pressing SYS button to scroll through menu options. As you scroll, the menu option being accessed (operating…

2, Peco WavePRO K2500-001 2 Thank you for choosing the PECO WavePRO TM Wireless System (Model K2500-001). The PECO WavePRO Wireless System is a wireless thermostat transmitter and receiver. It is designed for use with conventional (gas, oil, electric) or heat-pump systems. It can support up to 2-HEAT/ 2-COOL …