Hand Held Products 4600g Operation & User’s Manual

59, 4600g, 4600r, 4800i User’s Guide 3 - 11 Aimer Mode Note: Concurrent is the default for units with 4X00 engines. Interlaced is the default for units with 5X00 engines. Refer to the Show Engine Revision on page 11-1 for information on determining the engine in your unit. The 4600r does not…

233, Programming Chart Note: If you make an error while scanning the letters or digits (before scanning Save), scan Discard, scan the correct letters or digits, and Save again. 6 7 5 4 8 9 Save Discard …

194, 12 - 18 4600g, 4600r, 4800i User’s Guide EAN/JAN-13 2 Digit Addenda 2 Digit Addenda On E13AD21 7-26 *2 Digit Addenda Off E13AD20 7-26 5 Digit Addenda On E13AD51 7-26 *5 Digit Addenda Off E13AD50 7-26 EAN/JAN-13 Addenda Required *Not Required E13ARQ0 7-26 Required E13ARQ1 7-26 EAN/JAN-13 Adden…

9, Hand Held Products 4600g iii Illumination Lights................................................................ 3-9 Imager Time-Out ................................................................ 3-10 Aimer Delay........................................................................ 3-10 User-Specified Aimer…

41, 4600g, 4600r, 4800i User’s Guide 2 - 9 RS-232 Baud Rate Baud Rate sends the data from the imager to the terminal at the specified rate. The host terminal must be set for the same baud rate as the imager. Default = 38,400. 300 2400 600 1200 4800 * 38400 9600 19200 115,200 …