Hanna Instruments HI 9026V Instruction Manual

7, 12 13 After calibrating the first point (see above), press the CAL key to end the calibration procedure. Note: With one-point calibration there is not “Condition” and only the frame is shown. Calibration time-out is active. CUSTOM BUFFER SELECTION • For setting the custom buffer v…

11, 20 SALES AND TECHNICAL SERVICE CONTACTS Australia: Tel. (03) 9769.0666 • Fax (03) 9769.0699 China: Tel. (10) 88570068 • Fax (10) 88570060 Egypt: Tel. & Fax (02) 2758.683 Germany: Tel. (07851) 9129-0 • Fax (07851) 9129-99 Greece: Tel. (210) 823.5192 • Fax (210) 884.0210 …

8, 14 15 pH BUFFER TEMPERATURE DEPENDENCE pH readings are strongly affected by temperature. The calibration buffer solutions are affected by temperature changes to a lesser degree than normal solutions. For manual temperature calibration please refer to the following chart. TEMP pH BUFFER VALU…

1, 1 Instruction Manual HI 9026V Complete Portable Kit for pH, mV & Temperature Measurements in Wine and Must with Calibration-Check TM www.hannainst.com …

9, 16 17 pH ELECTRODE MAINTENANCE Preparation Remove the electrode protective cap. Do not be alarmed if any salt deposits are present: this is normal with electrodes and they will disappear when rinsed with water. During transport tiny bubbles of air may have formed inside the glass bulb. The electrode…

6, Hanna Instruments HI 9026V 10 11 CALIBRATION HI 9026 is factory calibrated for ORP and temperature ranges. If recalibration is needed, please contact your dealer or the nearest Hanna Service Center. pH CALIBRATION It is recommended to calibrate the instrument frequently, especially if high accuracy is requir…