HANNspree HT09 Operation & User’s Manual

51, 51 English 7 Setting the TV on the Wall Dissembling the stand base: 1 Disconnect all the cables and cords from the TV to prevent breakage. 2 Carefully place the TV face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage to the TV. 3 Squeeze the sides to release the r…

29, 29 English 3.1 OSD Setting Menus Follow the instructions indicated on the bottom of the OSD Function Menu. Press / on the control panel or / arrow keys on the remote control to scroll through the menus. Press INPUT on the control panel or OK key on the remote control to…

27, 27 English 3 Press to eliminate sounds, and press again or press the volume buttons to restore the original volume. 2.3.6 Editing Channel Table or Favorite Channel 1 Press MENU on the control panel or remote control, then select to enter the Channel menu. 2 Select Channel List. 3 If…

39, 39 English 6.1.4 Setting Volume Lock Operating procedures are as follows: 1. Press the corresponding electronic equipment button. The indicator light will come on for 200ms and then go off; after 3 seconds, the indicator light will come on again, showing that the setting mode has been e…

40, HANNspree HT09 40 English perform this unlock operation, while those electronic equipment modes not so operated still have channel locked up). The indicator light then goes off and setting mode is exited. 4. During the setting process, releasing the electronic equipment button exits the setting mode im…

13, 13 English 1.3 Control Panel Description Button Function Power Power button. Press to turn the TV on or off. Input source INPUT Press to open the input source list. Menu MENU Press to open the OSD menu. Channel select Press to increase the channel number or move upward to the previous item on the…