Perception Digital PD-099 Operation & User’s Manual

29, 28 7. Unable to install software. ¸ Our installation CD only supports Windows 98, ME, NT, 2000, XP XP Pro, XP home with Latest Windows Service Pack. Other systems are not supported. 8. Unable to find the mass storage device after connecting to the PC. ¸ Make sure your device is p…

18, Perception Digital PD-099 17 Switching Modes To switch from one mode to another, press the MENU button, then press the button. Next, to select the mode, use the / scroll to select the desired mode, then press the button to confirm your selection. Playing Music or Voice files 1. Play and stop Press th…

26, 25 To change system settings, use & to move to each particular system setting sub-menu and press to enter the sub-menu. Use & to choose the desired settings. Press to confirm. 1. Source: You can select the recording source in…

28, 27 Troubleshooting 1. The player does not work or nothing is displayed on the LCD. ¸ Check the capacity and the polarity of the battery. ¸ The player will automatically shut down to save power if it is left idle for 1 minute. 2. The buttons are not responding. ¸ Check if the ìH…

19, 18 4. A-B looping While playing music or voice, you can set a section to repeat continuously. Press the REC button to mark the point where you want the section to start (Point A). Then, press REC again to mark where you want the section to end (Point B). The selected section will th…

17, 16 Key MENU VOL + VOL - REC ––>Hold Key Action Short Long Short / Long Short / Long Short / Long On / Off Recording Pause/Resume current track Power off No response No response No response No response No response Stop recording (Go back to previous screen) All keys are locked Operating c…