Flymaster GPS Navigator Operation & User’s Manual

35, 11.1 Set Altimeter The “Set Altimeter” page allows the user to adjusts the barometric altimeter. A barometric altimeter calculates altitude based on atmospheric pressure. Since atmospheric pressure can vary substantially with meteorological conditions it should be calibrated pr…

23, section 11.1 ). 6 Menu mode When in flight mode, pushing the menu (S1) button accesses the menu mode. When in menu mode pushing the menu(S1) button will go back to flight mode. Figure. 16 - Main Menu Screen To access the different items on the menu you can use the UP(S3) and DOWN(S4)…

30, activate the actions menu list. Select the “Delete Route” option from the menu, and push the ENTER button to confirm. The route will be deleted and the WL area activated. 7.3 Route Definition Consider the route represented in Figure. 20, were “T01” is the take-off, follo…

45, The ID corresponds to the last for digits of the serial number of the probe you wish to connect. For example consider the M1 with the serial number S/N 1034 00024. In this case the M1 ID should be set to 0024 (see Figure. 34). Note: The serial number of the M1 can be found in the…

29, Flymaster GPS Navigator Table 7 - Waypoint Types Type Time field usage Take off This first route waypoint is automatic defined as Take-Off. This waypoint however, is only a place marker for calculating the entire route length. LIVE will ignore it for navigation purposes. Cylinder The cylinder type i…