Phase Technology CS-6R Install Manual

Install Instructions For: 
 
| 888-phase tk | www.phasetech.com |
CS-6RCS-6R
© 2005 PhaseTech, Inc.  All rights reserved. 
The CS-6R full range stereo custom installation loud-
speaker has been designed for easy in-wall or ceiling 
mounting. Please read the instructions thoroughly before 
beginning and follow them step by step for a successful 
installation and years of listening pleasure.
Limited Warranty
Phase Technology warrants its loudspeakers to be free 
from defects in material and workmanship for a period of 
ten (10) years for speaker product and three (3) years for 
the electronic components to the original purchaser.  
Purchase must be made from an authorized Phase 
Technology dealer.
This warranty does not cover service or parts to repair 
damage caused by misuse, abuse, damage while in 
transit, alterations, unauthorized repairs, failure to follow 
instructions, fire, flood or any other cause beyond the 
reasonable control of Phase Technology.  Defects in 
speaker cabinets or grilles must be brought to the 
attention of your dealer immediately after purchase.  This 
warranty will be void if the products’ serial number has 
been altered or removed.
To obtain warranty service, defective product must be 
shipped in its original carton or equivalent together with 
original invoice or bill of sale, insured and prepaid to 
your authorized Phase Technology dealer or the factory 
when warranty service is requested.
If you choose to return the defective product to the 
factory you must first call us at (904) 777-0700 to 
obtain a Return Authorization number prior to shipping.  
Product repaired under this warranty will be returned to 
you freight collect.
Implied Warranties
Phase Technology will not pay for loss of time, 
inconvenience, loss of use, or property damage caused 
by your speaker product or its failure to work, or any 
other incidental or consequential damages.  Some states 
do not allow the exclusion or limitation of consequential 
damages, so the above limitation may not apply to you.
Phase Technology Corporation
6400 Youngerman Circle
Jacksonville, Florida   32244
(904) 777-0700  Telephone
(904) 771-7793  Fax
Mounting Considerations
CAUTION: When choosing a location for mounting the speakers, make 
certain the wall or ceiling material is sturdy enough to support the weight of the 
speakers.
1. Decide where the speakers will be mounted.  Be careful not to 
  mount them over a stud or any other obstruction and at least 
  3/4” from the stud.
2. It is recommended for maximum performance, although not 
  necessary, that you place a piece of fiberglass or some similar 
  dampening material behind the speaker.
3.  Be certain you can run the speaker wire to the point where the 
  speaker will be mounted.  Phase Technology recommends 18
  gauge for distances up to 15 feet and a minimum of 16 gauge for 
  distances up to 50 feet.  For longer lengths or purer signal 
  connections, consult your retailer.
4. The grilles and baffle edge come in an off-white finish. Paint them using a  
  good quality interior or exterior paint in the color of your choice. Place the  
  grille in the baffle prior to painting. The cloth behind the grille will keep the  
  paint from getting on the speakers. Use as light a coating as possible to  
  avoid clogging the holes in the grille.
 
**Do not paint the speaker drivers as this could cause damage**
Mounting Instructions
1. Using the template as a guide (inside package filler), carefully cut a 
hole in the wall or ceiling.  Find the speaker wire leads and pull them through.
 
2. Remove the grille from the speaker system.
3. Locate the speaker wire and attach it to the CI input terminals: red/plus, 
black/minus
4. If you are using any dampening material, secure it in the hole behind where 
the speaker will be located.
5. Place the speaker in the cut-out.
6. Turn the four locking screws counterclockwise one full turn to release the 
locking clamps.  Once released, turn them clock-wise until they firmly clamp the 
speaker to the mounting surface.
7. Position the grille on the baffle and firmly push it into the flange until you feel 
it is securely in position.
8. The speaker system is now ready to be turned on.
9. For removal of the custom installation speaker remove the grille.  Turn the 
four locking screws counterclockwise until they release from the wall or ceiling.  
Then pull the system out and disconnect the speaker wires.

• 
  Panasonic CS-ME10DTEG

  Air Conditioner Guidance #345B46

  CS-ME10DTEG, 136, panasonic/cs-me10dteg.pdf

• 
  D-Link KVM-121

  D-Link Reference Book: KVM-121 (#LNBL9S)

  KVM-121, 76, d-link/kvm-121.pdf

• 
  Sony DPS-R7

  Sony Recording Equipment Manual (#EL7G64)

  DPS-R7, 64, sony/dps-r7.pdf

• 
  Radio Shack Weatheradio

  Radio Shack Handbook Weather Radio Weatheradio (#3AVH8Y)

  Weatheradio, 36, radio-shack/weatheradio.pdf

• 
  IWAKI MDM 50

  IWAKI Reference Book: MDM 50 (#DTT2L6)

  MDM 50, 48, iwaki/mdm-50.pdf

• 
  Toyota CAMRY DVD VIDEO

  Automobile Tutorial #IUL5N8

  CAMRY DVD VIDEO, 16, toyota/camry-dvd-video.pdf

• 
  Magnetrol Enhanced Model 705

  #IORW3I: Enhanced Model 705 Tutorial

  Enhanced Model 705, 56, magnetrol/enhanced-model-705.pdf

• 
  Silicon Laboratories Si5342

  Computer Hardware Tutorial #32HNA9

  Si5342, 222, silicon-laboratories/si5342.pdf

• 
  SKF TLGB 20

  SKF Tools Manual (#D28R2M)

  TLGB 20, 421, skf/tlgb-20.pdf

• 
  Nikon D850

  Nikon Guide Digital Camera D850 (#4TP1X1)

  D850, 400, nikon/d850.pdf

• Search YouTube Videos for Phase Technology CS-6R Device
• Search Google for Phase Technology CS-6R Information
• Search Photo of Phase Technology CS-6R in Google Images
• Search Twitter for Phase Technology CS-6R News