Baracoda USB Plug Operation & User’s Manual

13, USB Plug & Scan Dongle - User Guide June 07 © Baracoda 2007 13 5.3 Only for BC2604/BL2604/BLR2604 products The Number of Beeps for ‘good scan’ Warning: These settings are only possible with BC/BL-2604 scanners. After scanning the desired barcode, disconnect the scanner …

9, USB Plug & Scan Dongle - User Guide June 07 © Baracoda 2007 9 3.4 How to connect your RoadRunners and BaracodaPencil2 1. Reset the scanner (see RoadRunners user guide: barcode to scan). 2. Plug the dongle into the USB port of the computer. 3. Wait 5 second…

6, Baracoda USB Plug USB Plug & Scan Dongle - User Guide June 07 © Baracoda 2007 6 2.4 Batch mode The batch mode can be used with scanners supporting it: - Roadrunners (CPU firmware version 3.20 and higher) - BaracodaPencil2 (firmware version 1.10 and higher) This functionality …

8, USB Plug & Scan Dongle - User Guide June 07 © Baracoda 2007 8 3.3 How to connect your BCM2604-L/BCM2604-F 1. Reset the scanner by taking out and replacing both batteries. 2. If the scanner has not been programmed to read the Code 128 symbology, scan the Code 128 active barcode…

5, USB Plug & Scan Dongle - User Guide June 07 © Baracoda 2007 5 2.3 No data loss mode The ‘No data loss mode’ is activated by default for all scanners supporting the feature (2604, RoadRunners (Decoder version 3.10 or newer) and BaracodaPencil2. When you leave t…

12, USB Plug & Scan Dongle - User Guide June 07 © Baracoda 2007 12 5.2 Suffix Disable suffix [default] EOT suffix ETX suffix Horizontal Tab (HT) suffix Carriage Return (CR) suffix Line Feed (LF) suffix Carriage Return (CR)+ Line Feed (LF) suffix …