Helio Electric Cycle Owner's Manual

21, Helio Electric Cycle ☺ “Everywhere is walking distance if you have the time.” - Steven Wright The Charging Inlet Charging your Helio Cycle is simple. The charging inlet is located under the rubber splash cover on the instrument panel. Pull off the rubber cover and insert the proper e…

35, Tires Adjusting the pressure Helio Cycle tires operate in a pressure range. The maximum pressure is 100 PSI (690kPa.) The minimum pressure is 60 PSI (414kPa.) Tires at maximum pressure will provide superior handling characteristics, very little rolling resistance and a longer range …

25, How do you know if your motor is overloaded? It depends upon terrain, rider weight and ambient temperature, but generally – the motor is overloaded anytime when at full throttle the cycle is not able to maintain normal maximum speed. L If you are driving at full throttle (in GO…

7, Your Electric Helio Cycle (The Helio also includes turn signals and other details that are fully explained in this manual) Congratulations! We’re glad that you have purchased an electric Helio Cycle. Your Helio Cycle is a high-quality vehicle designed to be extremely safe an…

15, 15. Place the aluminum cap (found in the parts box) onto the top of the handlebar stem, and thread the headset retaining bolt through the cap into the top of the fork tube. 16. Tighten the headset retaining bolt with 5mm allen key until the black rubber compression ring (b…