Sound Performance Lab GOLDMIKE MK2 2485 Manual 

24, 24 GoldMike MK2 SPL products are guaranteed for a period of one year against faults in materials or workmanship. Refer to your local supplier for full sales and guarantee terms. Guarantee …

21, GoldMike MK2 21 • 24-Bit/96kHz A/D converter (upgrades after sale can be done by clients). • Lundahl input and output transformers (upgrades after sale by authorized service personnel or SPL only). 24/96 A/D Converter The optional 24/96 Converter module (model 2376) provides a digital ou…

7, GoldMike MK2 7 Again, while the GoldMike MK2’s housing is EMV-proof and protects against HF-interference, placement of the unit is very important since it amplifies microphone signals as well as other unwanted signals. Before connecting the GoldMike MK2 or any other equipment …

10, 10 GoldMike MK2 Power You guessed that: with the Power switch the GoldMike MK2 is activated, verified by the illuminating switch. Please read “Before You Begin” on page 5 before throwing in for the first time. Gain The Gain control determines the pre-amplification of the micro- p…

20, Sound Performance Lab GOLDMIKE MK2 2485 20 GoldMike MK2 In the case of the power supply, no expense was spared. After all, the power supply is one of the primary factors in the audio quality and overall sound of any device. Just like the best coffee beans in the world will not produce a good cup of coffee with poor water, the bes…

6, 6 GoldMike MK2 Rear Panel/Connections Wiring RETURN SERIAL NUMBER GoldMike 2 4860000 Sound Performance Lab XLR Wiring: Pin 1 = GND, Pin 2 = (+), Pin3 = (–) TRS Jack Wiring: Tip = (+), Ring = (–), Sleeve = GND Mono Jack Wiring: Tip = (+), Sleeve = GND WARNING TO REDUCE RISK O…