Spectra Logic Spectra 12000 Supplementary Manual

39, Spectra Logic Spectra 12000 60-Slot Segment Upgrade Guide 39 Install the Magazines 9. Insert the next magazine (one with a yellow label) into the yellow-coded niche next to the red-coded niche—the niche next to the segment you just installed (Figure 37). The tabs on the magazines should overlap and fi…

22, 22 60-Slot Segment Upgrade Guide Replace the Rail-Mounted Robotic Rack Assembly 7. Replace the four (captive or flush-mount) screws that hold the robotic rack assembly to the chassis (Figure 19).  8. Proceed to Finish: Spectra 12000 Library on page 25. Figure 19 Location of the …

45, 60-Slot Segment Upgrade Guide 45 Finish: Spectra 64000 Library 4. Using an appropriate screwdriver, tighten the five screws that hold the swinging drive slot door to the robotic rack assembly (Figure 46). 5. Plug in the 25-wire black connector at the bottom front of the robotic rack assem…

9, 60-Slot Segment Upgrade Guide 9 Prepare the Spectra 12000 Library Note: Before proceeding, check to see if the drive slot door located on the left of the drives is fastened to the robotic rack assembly with captive screws. If the drive slot assembly has no screws attaching it to the robot…

13, 60-Slot Segment Upgrade Guide 13 Remove the Carbon-Top Robotic Rack Assembly 1. Remove the five flush screws that hold the robotic rack assembly in the chassis (Figure 9). 2. Carefully slide the robotic rack assembly outward (Figure 10). Warning: The robotic rack assembly has no…