ESPRIT Esprit ET10 Owner's Manual

12, ET6 / ET8 / ET10 11 Assembly ( ET10 )  STEP 1 Remove all parts from the carton.  STEP 2 Connect the lower Computer Cable with the upper Computer Cable.  STEP 3 Hand tighten Right and Left Uprights into Main Frame with two 3/8 x 2 Button Head Socket Bolts, two 3/8 x 2T…

15, ET6 / ET8 / ET10 14 Getting Started: Power the treadmill on by plugging it into an appropriate wall outlet, then turn on the power switch located at the front of the treadmill below the motor hood. Ensure that the safety key is installed, as the treadmill will not power on without it.…

14, ET6 / ET8 / ET10 13 Getting familiar with the control panel  ET6 Console  ET8 / ET10 Console Operation of Your Treadmill …

23, ET6 / ET8 / ET10 22 TREADBELT TRACKING ADJUSTMENT: The performance of your treadmill is dependent on the frame running on a reasonably level surface. If the frame is not level, the front and back roller cannot run parallel, and constant belt adjustment may be necessary. The treadm…

6, ESPRIT Esprit ET10 ET6 / ET8 / ET10 5  NEVER operate this treadmill without reading and completely understanding the results of any operational change you request from the computer.  Understand that changes in speed and incline do not occur immediately. Set your desired speed on the computer console a…

17, ET6 / ET8 / ET10 16 To Turn Treadmill Off: (1) Display will automatically turn off (go to sleep) after 30 minutes (no key operations). The treadmill will draw very little current in sleep mode (about as much as your television when it is turned off). (2) Remove tether cord. (3) Turn of the m…