Hiprom Technologies 1756HP-GPS Operation & User’s Manual

30, 1756HP-GPS - User Manual Rev 2.8 . Page 30 of 39 The following structure can be used for the UTC to Gregorian conversion via the unconnected message. The structure holds both the data sent and received. GPSConvUTC Name Data Type Style UTCRequest DINT[2] Dec…

38, Hiprom Technologies 1756HP-GPS 1756HP-GPS - User Manual Rev 2.8 . Page 38 of 39 APPENDIX F GLOSSARY Communications format Format that defines the type of information transferred between an I/O module and its owner controller. This format also defines the tags created for each /O module Coo…

16, 1756HP-GPS - User Manual Rev 2.8 . Page 16 of 39 6.3. Output Image 6.4. Output Image Description Field Description Location Type Reserved Reserved 64Bits Local:s:O.Data[0] to Local:s:O.Data[1] 64BIT Time zone Time Zone Configuration Used to set t…

14, 1756HP-GPS - User Manual Rev 2.8 . Page 14 of 39 Dup Master A duplicate CST master has been detected 0 = No duplicate CST master detected 1 = A duplicate CST master is detected Local:s:I.Data[0].28 BIT CST Master This module is the local rack CST master…

36, 1756HP-GPS - User Manual Rev 2.8 . Page 36 of 39 APPENDIX E TIME STANDARDS There are many different time standards used in the world today. This chapter describes the different formats and standards used in the 1756HP-GPS module and how the relate to one another. …

6, 1756HP-GPS - User Manual Rev 2.8 . Page 6 of 39 The current status of the module is conveyed to the user by means of the 3 bi-color Status LED’s and the alphanumeric LED display. The following information is available to the user directly across the backplane by mean…