Vivotek VS2403 VS2403 VS2403 Operation & User’s Manual

16, Vivotek VS2403 VS2403 VS2403 - 15 - www.vivotek.com Software installation Easy way with installer program In order to configure Video Server’s remotely, administrators should keep the serial numbers of the new Video Server’s for identification. After successfully mounting Video Server’s in…

70, - 69 - www.vivotek.com (r/w) (restart) <blank> httpport (r/w) (restart) <positive number less than 65535> HTTP port <80> 0 LAN networktype (r/w) (restart) 1 PPPoE pppoeuser (r/w) (restart) <text string shorter than 63 …

17, - 16 - www.vivotek.com environment. If there is DHCP service over the network, the Installation Wizard will catch the given information, then display the serial number and given IP address for each Video Server as the figure above. If there is no DHCP server, the Video …

33, - 32 - www.vivotek.com The camera control will be activated only when both the attached “Camera Control” and “Camera Setting” are correctly configured. The camera ID may be relative to some DIP switch on the PTZ camera. Administrators may need to read the manual…

79, - 78 - www.vivotek.com F. Camera Control Cable The included cable can be used to control motorized cameras of desktop types from Sony and Canon. The pin assignment is illustrated in the following chart. To control cameras of another brand, check the user�…

24, - 23 - www.vivotek.com System Configuration Introduction The system configuration can be easily done remotely on Internet Explorer through the Web interface. Administrators may type directly the URL of system configuration, “http://<IP address of Video…