Standard Horizon CP180 Owner's Manual

42, Page 44 CP180 / CP180i 3. Move the ShuttlePoint knob to the right to select the Mark Name. Press [ENT] and the first digit in the name will be highlighted. 4. Move the ShuttlePoint knob up or down to select the first character. 5. Move the ShuttlePoint knob to the right to select the next c…

30, Page 32 CP180 / CP180i 4.2 INFO ON LAKES 4.2.0 Quick Info On Lakes Upon viewing the chart of a lake, you will click on to query the available information immediately displayed with many details. For example, see the following picture: Figure 4.2.0 - Example of Lakes info When the cursor is p…

90, Page 92 CP180 / CP180i H HDG ................................................................ 89 HDOP .............................................................. 89 HEIGHT .......................................................... 89 HIGH WATER ...................................…

12, Standard Horizon CP180 Page 14 CP180 / CP180i 2. Drill a hole in one area of the cutout area that will allow the blade of a jig saw to be inserted. Insert and cut out the area on the panel using the jig saw. 3. Next drill the four holes required to insert the GPS chart plotter with the mounting studs. 4. Install t…

31, CP180 / CP180i Page 33 To see the "Fishing" object press [MENU] (when the "Fishing" object is highlighted). On the screen appears: Figure 4.2.1a - Example of picture associated to the Fishing object …