Supplementary Manual for Standard Horizon GX2360S Marine Radio, Transceiver (1 pages)
Data: UPD 17th March 2024
Standard Horizon GX2360S Marine Radio, Transceiver PDF Supplementary Manual (Updated: Sunday 17th of March 2024 09:05:36 PM)
Rating: 4.9 (rated by 54 users)
Compatible devices: HX260S, HX370SAS, GX1246S, HX290E, Horizon Eclipse+ GX1250S, HX751, GX1270S, HX100.
Recommended Documentation:
Text Version of Standard Horizon GX2360S Marine Radio, Transceiver Manual (Summary of Contents)
(Ocr-Read of Document's Main Page, UPD: 17 March 2024)
GX2360SPage 60
9.3 PA/FOG OPERATION
When the RAM+ is connected to the QUANTUM it is capable of controlling the
30W Public address, 4 fog horns, bells, and whistles.
9.3.1 Operating the PA / Hailer
1. Press and hold the
[
NAV
]
key then select PA with the
[
]
or
[
]
key.
2. Press the
[
CALL/SET
]
key.
3. Press the PTT switch and speak into the microphone.
4. To turn up the PA Volume, press the PTT switch and press
the
[
]
or
[
]
keys to adjust the Audio output level. The
level can be set from 0 to 30W.
5. To adjust the listen back volume, (while in listenback mode)
press the
[
VOL
]
Key, then press the
[
]
or
[
]
key to the
desired listen back volume.
To exit from the PA Hailer mode, press the
[
CALL/SET
]
,
[
16/9
]
,
or
[
WX
]
key.
9.3.2 Operating the FOG Horn
The QUANTUM is capable of sending 4 pre-programmed fog signals and also
Horn, Siren, Aground and Anchor signals.
FOG 1: POWER BOAT UNDERWAY
FOG 2: POWER BOAT STOPPED
FOG 3: SAIL BOAT, FISH VESSEL, TOW VESSEL
FOG 4: VESSEL UNDER TOW
1. Press and hold the
[
NAV
]
key then select FOG with the
[
]
or
[
]
key.
2. Press the
[
CALL/SET
]
key.
3. Select the one of the eight functions described above with
the
[
]
or
[
]
key and press the
[
CALL/SET
]
key.
4. On the “Horn” and “Siren” modes, press the PTT switch to
activate the tone through the HAIL/PA speaker.
Press the
[
]
or
[
]
keys to adjust the Audio output level.
The level can be set from 0 to 30W.
5. To adjust the listen back volume, (while in listenback mode)
press the
[
VOL
]
Key, then press the
[
]
or
[
]
key to the
desired listen back volume.
To exit from the FOG or other signaling mode, press the
[
16/9
]
,
[
WX
]
, or
[
CALL/SET
]
key.
Recommended:
WTW6600SB0, HT-DDW650, CF-51JFDECBM - Toughbook 51 - Pentium M 2 GHz, RGE 300
E90-DTU, SFP OC3-48 1G CWDM 80KM, 7KE6000-8AL/CC, IC-V200T, ZM-24, IC-V8
-
SWRU341A November 2013 Web sites: www.ti.com/ble E2E Forum: www.ti.com/ble-forum CC2541 Advanced Remote Control Quick Start Guide Opening the Box and Evaluating Bluetooth® low energy Kit Contents 1 x Advanced Remote with batteries 1 x CC2540 USB Dongle 1 x CC Debugger ...
Model & Doc Type: CC2541 7
-
Kenwood TH78A Mod Instructions I uploaded the following texts to the old norcal AX.25 packet network way back around 1992. I put the information together from various sources and included the receiver sensitivity measurements I did after modifying my TH78A. The upload capacity of the n ...
Model & Doc Type: TH-78A 4
-
Regulatory Approvals FCC Class A UL 1950 CSA 22 No. 950 EN60950 CE – EN55022 Class B – EN50082-1Canadian EMI Notice This Class A digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment Regulations. Cet appare ...
Model & Doc Type: MIL-05T 1
-
© 2004-6 PRINTED IN JAPANB51-8689-00 (N) 961VHF FM TRANSCEIVERTK-2180SERVICE MANUALGENERAL ...................................................2SYSTEM SET-UP .......................................2REALIGNMENT ..........................................3DISASSEMBLY FOR REPAIR .................... ...
Model & Doc Type: TK-2180 70
Operating Impressions, Questions and Answers:
