Stewart Filmscreen Corp C Installation Instructions Manual

10, The motor requires standard 120V 60 Hz input (unless an alternate voltage has been specified). All connections are made to the electrical box on the side of the Luxus unit (audience left). In addition to the standard high-voltage 3-position switch, there are optional switch controls avail…

19, Refer to the following guidelines if you encounter a difficulty in the operation of your Stewart Filmscreen. Problems related to electrical or motor function may require a qualified service person or electrician. Should you have a problem that is not addressed here, call the Stewart Filmscreen C…

8, Stewart Filmscreen Corp C Professional mounting techniques should be adhered to. Stewart Filmscreen Corporation cannot be liable for substandard or faulty installations. Make sure that you mount the screen so that the electrical box is on the left side (audience left). Wall installation 1. Mount screen thro…

9, Recessed or concealed mount You can install the screen so that the motor is recessed and the bottom is flush with dry wall or a suspended ceiling. Refer to Figure 4. 1. Attach the supplied ceiling mount brackets to the top of the screen unit. 2. Install the unit onto the support structure making s…

15, Luxus A/SR-1 Electriscreen: Owner’s Manual 13 Installing the infrared remote control option The optional Stewart Filmscreen infrared remote control allows control of the screens from anywhere in the room. Note: The distance between the hand-held remote control and the receiver…

12, Installing the screen trigger interface option The optional 12V screen trigger interface enables up and down operation of the screen in conjunction with a projector, tuner, VCR, cable box, or switched AC outlet. Once the AC power outlet is installed near the screen, an electrician is not…