Home Automation 70A00-1 Operation Manual

13, Operation Turn on the unit by moving the Power Switch to the “On” position. When the unit is first switched on, the C3 unit searches for a network before calls can be made. Signal Strength Indicators In Use Indicator Network Indicator Powe r Indicato r …

8, Installation ① Antenna Jack ② Power Switch ③ Power Jack ④ Phone Jack ⑤ PSTN Jack ① Antenna Jack (SMA): Connects the supplied antenna ② Power Switch: Turns the unit On or Off ③ Power Jack: Connects the 12V Power Adapter ④ Phone Jack: Connects to…

12, Connecting a PSTN Landline Connect the incoming PSTN landline to the modular jack labeled “PSTN” on the C3 unit. If a PSTN landline is present, the GSM network is used to backup the PSTN telephone service. If the landline service is unavailable, the GSM network will b…

6, Home Automation 70A00-1 Everyday use… When the C3 is connected to the GSM cellular network, attached telephones can be used to make calls. If a landline is present, you will hear the normal dial tone and you can make your call as normal using the landline service. However, if the landline is currently unavai…

9, Installing or Replacing the Battery 1) If applicable, remove the battery compartment door screw located on the battery door tab. 2) Open the battery compartment by pressing down on the battery door tab and removing the battery compartment door. 3) If applicable, remove …