Sub-Zero Sub-Zero Manual 

61, 61 FULL-SCALE TEMPLATES The full-scale illus- trations on the following pages enable you to under- stand some of the unique situations you may face as you plan for the installa- tion of the Wine Storage units. Use these illustrations as templates. DOOR FRAME PROFILE A 57 mm Rail/Stile Glass A…

41, 41 As the reveal between cabinets and the Integrated unit decreases, the potential exists for severe finger pinching or crushing if a hand or fingers are placed in the opening when the door is closing. When 19 mm or thicker panels are used and a reveal less than 6 mm is maintained, the door pan…

24, 24 PANEL AND HANDLE PROFILE – OVERLAY AND STAINLESS STEEL APPLICATION 32 mm PANEL 25 mm PANEL 6 mm PANEL 13 mm PANEL 19 mm PANEL 16 mm PANEL DOOR 6 mm APPROXIMATE THICKNESS OF WRAPPED STAINLESS STEEL DOOR NOTE: FOR OVERLAY APPLICATIONS, OPTIONAL STAINLESS STEEL HANDLE MUST BE MOU…

9, 9 MODEL I650 OVER-AND-UNDER MODEL OPTIONS Overlay Design I650/O Classic Stainless Steel I650/S SPECIFICATIONS Overall Width 914 mm Overall Height 2134 mm Overall Depth 610 mm Refrigerator Capacity 445 L Freezer Capacity 139 L Min Height Required 2108 mm Door Swing Clearance 916 mm Shippin…

60, Sub-Zero Sub-Zero HARDWARE CONSIDERATIONS With Model I424 (overlay), Models I427 and I427R (integrated) and Model I430 (overlay), you must supply your own handle hardware. It is recommended you use our optional handles and use the pre-drilled holes supplied to locate the handles within the frame of our unit.…

21, 21 INSTALLATION To install overlay panels, see the detailed procedures outlined in the Sub-Zero Built-In Installation Guide. ACCESSORIES Optional accessories are available through your Sub-Zero dealer. HANDLE HARDWARE Overlay models come without handle hardware. The beauty of this …