Sumix SMX-12A2X Series Operation & User’s Manual

19, Getting Started: Restarting the Camera Driver 19 SMX-12A2x Series Gigabit Ethernet Camera User Guide Restarting the Camera Driver Before launching the Camera Application, the camera driver should be restarted. To restart the camera driver: Go to Start> Programs> Sumix> SMX12A2 Cam…

23, Tuning Guidelines: Initial Settings 23 Chapter 4 TUNING GUIDELINES Initial Settings Start video from the camera using the Start Video button on the camera application’s toolbar: The illumination of the camera’s image depends on the values of frequency, exposure, gain and the ima…

50, Sumix SMX-12A2X Series External Trigger: Soldering of Connector with Cable 50 SMX-12A2x Series Gigabit Ethernet Camera User Guide 3 Remove the rear part of the connector from the main part. Figure 7-7 Removing of the rear part of the connector from the main part Unscrew the inner part of the connector: Figure 7-8 The …

6, Introduction: 6 SMX-12A2x Series Gigabit Ethernet Camera User Guide ● Gigabit Ethernet full duplex mode Interface ● Ethernet cable length up to 100 m ● Power Over Ethernet (PoE) IEEE 802.3af compliant or external power: 5 V (500 mA) ● Hardware image processing (Gamma, brightness, contrast, …

56, External Trigger: Soldering of Connector with Cable 56 SMX-12A2x Series Gigabit Ethernet Camera User Guide Figure 7-18 Inserting of the inner part of the connector in the main part Screw in the inner part of the connector in the following way: 1 Fix the inner part of the connector with twee…

24, Tuning Guidelines: Color Tuning 24 SMX-12A2x Series Gigabit Ethernet Camera User Guide To tune light in the image: 1 Use maximum diaphragm aperture of your lens. 2 If the Exposure slider is at maximum and more light is needed, decrease frequency (it will enlarge the exposure inter…