Whistler FUZION Installation Instructions Manual

6, 10 INSTALLATION OF RADAR ANTENNA 9 The Small L Brackets are fastened to the Large L Bracket using the #10-32 x 1/2" bolts, #10-32 nuts and lock washers. To fasten the Large L or Small L Brackets to your vehicle, mark the supporting structure through the appropriate holes in the brackets, then …

8, 13 Installing the Laser Antenna Before using, attach the suction cup and rubber bumpers (2) to the metal bracket. If necessary, you may bend the metal bracket in order to position the laser antenna correctly (3-lens array facing forward, single lens facing behind.) Laser antenna mounted with w…

10, 17 18 PROBLEM: No display or audio. • Check fuse in power cable, replace if necessary. • Check fuse in fuse box, replace if necessary. • Make sure power cable is properly grounded. PROBLEM: Unit alarms when using vehicle equipment or electrical accessories (brakes, power mirror…

1, Installation Instructions Laser/Radar Detector THE WHISTLER GROUP, INC. CORPORATE HEADQUARTERS 13016 N. Walton Blvd. Bentonville, AR 72712 TEL (479) 273-6012 FX (479) 273-2927 www.whistlergroup.com P/N 260021, ©The Whistler Group, Inc 2006 www.whistlergroup.com FU FU Z IONION …

4, Whistler FUZION MOUNTING FASTENERS 6 MOUNTING FASTENERS 5 Bolt #10-32 x 1-1/4" Bolt #10-32 x 1/2" Nut 4mm Lock Washer 4mm Flat Washer A B Sheet metal Screw #6 x 3/4" Sheet metal Screw #4 x 5/8" Hook and Loop Fastener C D E F G H J I Mountable Cable Tie 4" Cable Tie K I…

9, INSTALLATION OF CONTROL PANEL 15 Antenna Cable Connection The stereo connector on the end of the antenna cable plugs into ANT. cable on the back of the control panel. Laser Antenna Cable Connection After mounting the laser antenna conceal the cable and plug the stereo jack connecto…