Horstmann ChannelPlus H27ZXL Series 2 User Operating Instructions Manual

6, 6 Setting the Programme Times The programme times have been preset as shown in the chart below. If any changes are required to the programme times please complete the operation as described in the owchart left. 1st ON 1st OFF 2nd ON 2nd OFF 3rd ON 3rd OFF Mon - Fri 6.30AM 8.30…

10, Horstmann ChannelPlus H27ZXL Series 2 10 Adjusting Clock Options The programmer has been preset to display the time in 24 hour clock format, should you prefer AM/PM format then please use the procedure given in the owchart opposite. General Information BATTERY The programmer is tted with a non-rechargeable, n…

8, 8 Adjusting Default Settings The ChannelPlus H27ZXL Series 2 has a number of default settings which are normally installed. These settings are designed to reduce the need for user intervention upon installation of the programmer. However it is possible to customise the user display by followin…

11, 11 Adjusting Channel Headings The programmer has been preset to display the channel heading as ‘Zone 1 and Zone 2’, should you require either the ‘Heating/Water’ or ‘Channel’ options then please follow the owchart opposite. General Information RESETTING THE CHANNELPLUS H27ZXL SERI…

7, 7 Setting the Holiday Mode The holiday mode can be used to suspend the program function of the ChannelPlus programmer, it can be set in advance of your departure date and for as long a period as required. The holiday function operates from mid-day to mid-day, this means it can be ea…