Elmo EV-2000AF Instruction Manual

26, 25 General Camera 8. SPECIFICATIONS Item Specifications Power source Rated current AC outlet 1 pce. (Max. 400W/Unswitched) AC120V 60Hz 0.5A Outside dimensions 500mm(W) X 612mm(D) X 99mm(H) (19.7 X 24.1 X 3.9 in.) - When folded 706mm(W) X 403mm(D) X 575mm(H) (27.8 X 15.9 X 22.6 in.) - …

17, 16 Focus Auto Focus To operate Auto-Focus, press the auto focus button [AF] on the front operation panel or wireless remote control, and the Auto-Focus will be activated. While the auto-focus is in operation, the indication lamp blinks until the object is brought into focus. The Presenter featur…

11, 10 3. SETTING UP (1) Raise the column. Raise up the column once, and fall it until it is locked. Note: The lighting arm (L) cannot be independently raised. Note: Unless the column is fully raised up, it may not be locked when it is fallen. (2) Raise the lighting arm (R) unit, and turn the camera hea…

13, 12 4. OPERATION PROCEDURES (1) Turn ON the power switch. Note: Before turning ON the power switch, connection to the monitor should have been completed. Note: If the power switch is turned ON immediately after being turned OFF, the Presenter may not operate. For restarting, turn ON …

16, 15 5. VARIOUS FUNCTIONS Lighting The lighting for presenting printed matter or other material is installed on standard. Each time the lighting button [LAMP] on the wireless remote control is pressed, the lighting operates in order of the L-side lamp alone lights up the L- and R-side lamp goe…

10, Elmo EV-2000AF 9 2. WIRELESS REMOTE CONTROL Point the infrared emitting part of the wireless remote control unit at the infrared sensor of the Presenter, located on the top of the column, and press the button for the desired function. The receivable range may be narrowed when the Presenter is p…