Huffy 1C4880-A01 Owner's Manual

4, The Owner’s Responsibility WARNING: This bicycle is made to be ridden by one rider at a time for general transportation and recreational use. It is not made to withstand the abuse of stunting and jumping. If the bicycle was purchased unassembled, it is the owner’s responsibility t…

42, Huffy 1C4880-A01 1 Replacement Part Order List To order warranty replacement parts, call us at (E.S.T.) 1-800-872-2453. To order the correct part, refer to the model number stamped on the inside cover of this manual and substitute it for the “xxxxx” below in our Part Number system. For example, if your mod…

8, 3. Assemble the quick release mechanism to the front wheel: - Remove the adjusting nut [4] and one spring from the quick release mechanism - Put the quick release mechanism through the front wheel hub - Put the spring and adjusting nut back on the quick release mechanism…

33, If your model does not already have the kickstand attached, determine which kickstand looks most like the one you have and follow the instructions. CAUTION: Do not sit on the bicycle with the kickstand down. Damage to the kickstand and frame can occur. Crank Mou…

29, 7. Test the travel of each brake lever: - Squeeze each brake lever with strong pressure - If the brake lever touches the grip, do Steps 1 through 7 again. WARNING: After you do Steps 1 through 7 again, if either brake lever touches the grip or does not work well, have a bicycle service shop re…