Huffy Portable System Owner's Manual

18, 18 P/N 211022 01/05 1. Bend upper halves of backboard brackets (29) to line up with holes in backboard and secure with bolts (32) and nuts (16). Attach rim (21) and plastic spacer ( ) to board with bolts (31) as shown. Tighten completely. 2 . 29 32 16 21 16 31 46 44 39 42 44 44 4444 4…

8, 8 P/N 211022 01/05 * You may have extra parts with this model. HARDWARE IDENTIFIER (BOLTS) HARDWARE IDENTIFIER (NUTS & WASHERS) Item #8 (1) Item #11 (1) Item #15 (2) Item #32 (2) Item #31 (4) Item #34 (1) Item #35 (1) Item #43 (5) Item #36 (1) Item #37 (1) Item #39 (5) Item #13 …

20, 20 P/N 211022 01/05 5. Install net clips. CLIP “ARM” CLIP “BODY” Insert one “arm” of clip into ram as shown. Twist “body” of clip slightly so that second “arm” slides over the top of the first “arm” as shown. Push in direction indicated by arrows. Push second “ar…

10, 10 P/N 211022 01/05 TOOLS REQUIRED FOR THIS SECTION HARDWARE USED IN THIS SECTION (not actual size) SECTION A: ASSEMBLE THE BASE This is what your system will look like when you’ve finished this section: (2) 1/2”, (2) 9/16" AND (2) 3/4" Wrenches 9/16” 1/2” AND/OR (2) Socke…

12, Huffy Portable System 12 P/N 211022 01/05 4. IMPORTANT! Center alignment slot of lower pole section (6) in a lower hole of middle pole section (5) as in step 3. While maintaining alignment, bounce assembly and lower pole section (6) together as shown until they no longer moved toward taped reference mark. 5 4 4 5 6…

17, 01/05 P/N 211022 17 TOOLS REQUIRED FOR THIS SECTION HARDWARE USED IN THIS SECTION (not actual size) SECTION B: ATTACH THE BACKBOARD This is what your system will look like when you’ve finished this section: (2) 1/2”, (2) 9/16"” AND (2) 3/4” Wrenches 9/16” 1/2” 3/4…