Huffy Universal Elevator Mount Owner's Manual

10, 10 P/N 211125A 10/01 3. NOTE: Two people required for this procedure, elevator assembly is heavy. Mount assembled elevator components to mounting brackets (24) as shown. (Refer to Steps 6 through 13 for elevator assembly.) 22 18 10 ft. (3.05 m) REGULATION RIM HEIGHT IS 10 F…

11, 11 10/01 P/N 211125A Item #5 (2) HARDWARE IDENTIFIER PARTS LIST * YOU MAY HAVE EXTRA PARTS WITH THIS MODEL. Item #4 (2) Item Qty. Part No. Description 11206117 Label, Warning 21906377 U-Channel 32906206 Struts 42202662 Bolt, Hex Head 5/16-18 x 4-1/2 52203099 Nut, Lock 5/16-18 61906350 Brac…

8, Huffy Universal Elevator Mount 8 P/N 211125A 10/01 FOR POLE MOUNTING ONLY 1. Assemble mounting brackets (24) to 3-1/2” (8.9 cm) pole as shown. Position bracket assembly to approx. 106” (2.7 m) above level playing surface. Tighten nuts (28) completely. NOTE: Equal rotations of nuts on each side of u-bolt (25) are n…

2, 2 P/N 211125A 10/01  WARNING FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE. Owner must ensure that all players know and follow these rules for safe operation of the unit.  See instruction manual for proper installation and  m…

9, 9 10/01 P/N 211125A FLAT SURFACE MOUNTING 1. A solid mounting base and/or surface, capable of withstanding normal recreational use forces, must be provided by the customer. A reliable carpenter or building contractor should be consulted if there are questions regarding this procedure. WAR…

4, 4 P/N 211125A 10/01 Drill holes in roof. Position angled brackets and secure to roof. NOTE: Hardware for this procedure not included due to various roof construction materials and design structure. NOTE: Two people recommended for this procedure. Hold angled brackets (6 and 7) on roof an…