Humminbird 515 Operation Manual

18, 29 Fish I Fish I D Alarm D Alarm Fish ID Alarm sounds when the FishFinder detects fish that correspond to the alarm setting. Fish ID Alarm will only sound if Fish ID+ TM is on. T o change the Fish ID Alarm setting: 1. Highlight Fish ID Alarm on the Alarms main menu. 2. Use the LEFT or RIGHT 4-Wa…

21, 35 Selec Selec t Views t Views (Adv (Adv anc anc ed) ed) Select Views sets the available views to either hidden or visible in the view rotation. The view will be removed from the view rotation if it is set to Hidden and will be displayed in the view rotation if it is set to Visible. The …

4, 1 How Sonar W How Sonar W ork ork s s Sonar technology is based on sound waves. The Humminbird FishFinder uses sonar to locate and define structure, bottom contour and composition, as well as depth directly below the transducer. Your FishFinder sends a sound wave signal and determines distance by…

19, Humminbird 515 Setup Menu T Setup Menu T ab ab From any view, press the MENU key twice to access the tabbed Menu System, then press the RIGHT cursor key until the Setup tab is selected. NO TE: Units - Temp (International Models Only) Units - Distance (Only if Temp/Speed is Connected) Units - Speed (Only …

20, 33 Units - Speed Units - Speed (with T (with T emp/ emp/ Speed Only) Speed Only) Units - Speed selects the units of measure for speed-related readouts, and will only appear in the menu if a Temp/Speed Accessory is connected and the paddlewheel has moved at least once. To change the Units - Spee…

8, 9 Structure ID® represents weak returns as light pixels and strong returns as dark pixels. This has the benefit of ensuring that strong returns will be clearly visible on the display. WhiteLine® highlights the strongest sonar returns in white resulting in a distinctive out…