Humminbird Wide Portrait Operation Manual

33, Humminbird Wide Portrait To disable the Fish Alarm, press MENU until the Fish Alarm menu appears on-screen. Use the UP ARROW to highlight “Off”, and let the menu time out. Fish Alarm settings are remembered when the unit is powered off. Triplog Triplog provides a running log of inf…

37, The Wide Portrait will also work with older Dual beam transducers. If you are using a Dual beam transducer, you must manually select “Dual” from the transducer menu as the Dual Beam transducer cannot be identified automatically. If “Dual” is manually selected, dual beam oper…

11, The transducer cannot transmit through air. The water purges any air from between the transducer and the hull and fills any voids in the coarse fiberglass surface. …

7, INSTALLATION TRANSOM INSTALLATION • If the propeller(s) is (are) forward of the transom, it may be impossible to find an area clear from turbulence, and a different mounting technique or transducer type should be considered. Step Two - Drill the Mounting Holes 1. Remove the mounti…

31, When the menu disappears, the graphics area of the screen will be divided in half. Full range information is on the right, Zoom information on the left. The digital depth readout is unaffected by Zoom. Pressing the DOWN ARROW again to highlight “Manual” activates Man…

2, INSTALLATION PREPARATION PARTS SUPPLIED PARTS SUPPLIED Before installing your new Humminbird fishsinder, please ensure the following parts are included in the box: • Fishfinder • Transducer with 20’ (6m) of cable and mounting hardware kit • Mounting system and mounting hard…