Humminbird AS RSL Operation Manual

4, Stem Mount (Existing Stem with 1" - 14 Thread) Follow these steps to stem mount the WSL antenna (stem not included): 1. Determine the best mounting location, then make sure that there is sufficient cable to route to the Fishfinder. Mark the mounting location, then drill a ⁵₈ &quo…

2, How the WSL Works The Wireless Sonar Link (WSL) is a line-of-sight accessory that works with your Fishfinder to receive remote sonar signals from a Remote Sonar Sensor (RSS). Radio signals from the RSS are received by the WSL and are transmitted over the Accessory Bus to the contro…

12, 4. The WSL View shows many black dots at high sensitivity settings. You are seeing noise or interference caused by one of several sources. Noise can be caused by other electronic devices. Turn off any nearby electronics and see if the problem goes away. Other sonar devices or any electron…

8, WSL X-Press™ Menu When the SmartCast WSL View is displayed, pressing the MENU key once will display the WSL X-Press menu. The WSL X- Press menu represents the settings most frequently used to optimize the WSL performance. NOTE: The WSL X-Press Menu can only be accessed from the Smart…

13, Specifications WSL Specifica tions Power Requirement ............................................................................................................................ Provided by the control head Integral Cabling .......................................................................…

9, Humminbird AS RSL WSL Accessory Submenu When the WSL Accessory is attached to the control head, the Accessory menu tab in the Main Menu System will contain an additional SmartCast WSL menu choice which, when selected, leads to the SmartCast WSL Accessory Submenu. Press the MENU key twice to access the …