Hyperion EOS 5i DP AC/DC Operation & User’s Manual

6, Lithium Mode (for 3.7V/cell types only!) LiPo CHARGE C=3000mAh 3S LiPo…

9, LBA DATAPORT FEATURE The DataPort is a 3-pin output which fits the option cable #HP-EOSLBA10-DPC. See top label to locate the DataPort on the top left side of your EOS charger. There are two main functions of the DataPort connection to LBA10 balance adapter: *The LBA communicates with the…

3, CAREFULLY FOLLOW THE BATTERY PACK MAKER’S RECOMMENDATIONS AND SAFETY ADVICE! Using the EOS 5i DP AC/DC The EOS 5i includes an Output Harness with two 4mm male “banana” connectors attached. First, solder your chosen battery connector to the bare wire ends of the harness, taking g…

4, Hyperion EOS 5i DP AC/DC REVERSE POLARITY error - if the battery is connected in reverse In our NiMH charging example above, we pressed the ENTER button when “NiMH” was blinking, to go directly to charge rate setting. However, if you want to enter DISCHARGE or CYCLE modes, you can press the BATT TYPE bu…

2, HYPERION EOS 5i DP AC/DC - User’s Manual Please read the following instructions carefully, to insure safety and convenience EOS 5i DP AC/DC Special Features *Two INPUT power choices: Use AC 100~240V at home, or DC 11~15V anywhere *Powerful, yet compact and portable with Wide sup…

7, Pb Mode (lead-acid battery) PB CHARGE C=3.0A 12Vpack BATT TYPE PB CHARGE C=3.0A …