IMC Networks iMcV-E1-Mux/4 Operation Manual

28, 24 Normal Operation Under normal operation the following LED display is given: E1 E1 E1 E1 E1 E1 E1 E1 10/100BaseT 10/100BaseT RS-232 RS-232 GREEN STAT GREEN ACT, LNK, MSA GREEN LNK Fiber Optic Cleaning Guidelines Fiber optic transmitters and receivers are…

4, iv Troubleshooting ----------------------------------------------------------------------------------- 21 Fiber Optic Port Verification----------------------------------------------------------------- 22 E1 Port Verification----------------------------------------------------------------------…

23, 19 E1 Port Configuration Screen Use this screen to access the loopback and name details for each of the four E1 ports. Enter the number of the menu item to edit, and enter the new value(s) when prompted. E1 Port Status Screen Use this screen to display the current…

2, IMC Networks iMcV-E1-Mux/4 ii FCC Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B computing device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is ope…

29, 25 • Use fiber patch cords (or connectors, if the fiber is terminated) from a reputable supplier. Low-quality components can cause many hard-to-diagnose problems in an installation. • Dust caps are installed at IMC Networks to ensure factory-clean optical devices. These p…

34, 30 IMC Networks Technical Support Tel: (949) 465-3000 or (800) 624-1070 (in the U.S. and Canada); +32-16-550880 (Europe) Fax: (949) 465-3020 E-Mail: [email protected] Web: www.imcnetworks.com …