Smart Parts hammer drill Operating And Maintenance Manual

1, Impulse TM Operating and Maintenance Manual for: Impulse TM Impulse Vision TM Please read all operating instructions before using the Impulse TM paintball marker. 100 Station Street • Loyalhanna, PA 15661 Telephone 724.539.2660 • Fax 724.539.2298 www.smartparts.com …

9, [ 10 ] Cleaning the Vision Eye Remove the Vision Eye ball detent (See page 6 for Vision Eye Assembly). Gently pull back the Vision Eye cover and remove the Vision Eye screw. Remove the Vision Eye from the Vision Eye slot and wipe with a clean paper towel or q-tip. NOTE: The ball detent for the …

7, [ 8 ] [640] Spring Cap [203] Seat Cap [233] O-Ring (09/90) [204] Seat Base [46] O-Ring (10/70) [774] Spring Cap Locking Screw [222] Filter Element [223] Bumper [230] Low Pressure Spring [227] Spring Guide [219] Spring Guide Pin [532] Low Pressure Piston [540] O-Rin…

10, Smart Parts hammer drill [ 11 ] Poor air efficiency - Verify that air system has no leaks. - Increase input pressure from air source and reset dwell to zero. From the lowest dwell setting increase the dwell until the desired velocity is achieved. (See page 5 for resetting Impulse Operating Pressures) Paint Bre…

3, [ 3 ] Electrical Power Supply The Impulse is powered by a replaceable 9-volt battery. With normal care and usage, the battery should last for approximately 25,000 shots. It is recommended that the Impulse be powered only by alkaline batteries. Propellant C02 / Compressed Air Supply NOTE: We do no…

2, [ 2 ] It is recommended that you do not dry-fire (fire without paint) your Impulse. The Impulse has a low pressure design, which makes the marker more accurate, and decreases ball breakage. Because of its low pressure design, the marker requires a paintball in front of the bolt to produce back-press…