Indesit KD3G2/G Instructions For Installation And Use Manual

6, 6 Electrial connection Power supply voltage and frequency: 230-240V a.c. 50 Hz. Note: the supply cable must be positioned so that it never reaches at any point a temperature 50°C higher than the room temperature. The cable must be routed away from the rear vents. Should you require it, you may us…

5, 5 Gas connection The cooker should be connected to the gas-supply by a corgi registered installer. During installation of this product it is essential to fit an approved gas tap to isolate the supply from the appliance for the convenience of any subsequent removal or servicing. Connection of the ap…

17, 17 Oven Cooking Chart The following times and setting are for guidance only. You may wish to alter the setting to give a result more to your satisfaction. When a different setting to that shown below is given in a recipe, the recipe instructions should be followed. Allow 15 minutes preheat fo…

7, 7 Disposing of the appliance When disposing of the appliance please remove the plug by cutting the mains cable as close as possible to the plug body and dispose of it as described above. Adapting the cooker to different types of gas In order to adapt the cooker to a different type…

24, Indesit KD3G2/G Key Contacts Repair Service and Information Desk UK: 0870 6070805 (Open 8am to 5.30pm Mon - Fri 9am to 5pm Sat and 10am to 4pm Sun Closed Bank Holidays) Note: Our operators will require the following information:- Model Number: Serial Number: Extended Warranty To join: UK 0870 442 7661 (Open …

9, 9 Burner and Nozzle Specifications Table 1 Liquid Gas Natural Gas Burner Diameter (mm) Thermal Power kW (p.c.s.*) By-Pass 1/100 Nozzle 1/100 Flow* g/h Nozzle 1/100 Flow* l/h Nominal Reduced (mm) (mm) *** ** (mm) Fast (Large)(R) 100 3,00 0,7 41 87 218 214 128 286 Semi Fast (Medium…