Infiniti JX 2013 Owner's Manual

214, Infiniti JX 2013 Language & Units: Use the INFINITI controller to select the “Lan- guage & Units” key. Select which setting you want to change using the INFINITI controller and selecting either the “Select Language” key or the “Select Units” key. Select Language: Select the “Engl…

242, Automatic intake air control In the AUTO mode, the intake air will be con- trolled automatically. To manually control the in- take air, press the air recirculation button. To return to the automatic control mode, press and hold the air recirculation button or press and hold the fresh air intake but…

441, ● Do not modify the vehicle’s suspension. If suspension parts such as shock ab- sorbers, struts, springs, stabilizer bars, bushings and wheels are not INFINITI recommended for your vehicle or are extremely deteriorated, the VDC system may not operate properly. This could adversely affect vehicle…

368, WARNING When the high fluid temperature protec- tion mode or fail-safe operation occurs, vehicle speed may be gradually reduced. The reduced speed may be lower than other traffic, which could increase the chance of a collision. Be especially care- ful when driving. If necessary, pull to the…

283, To exit the scrolling by letter mode, perform one of the following: ● Press the ENTER button on the INFINITI controller. ● Push the ENTER switch on the steering wheel. ● Do not touch the controls for 2 seconds. BLUETOOTH姞 STREAMING AUDIO (if so equipped) If you have a compatible Blue…

127, 120V OUTLET (if so equipped) CAUTION ● The outlet and plug may be hot during or immediately after use. ● Use power outlets with the engine run- ning to avoid discharging the vehicle battery. ● For devices that require power of 150W or over, the vehicle must be placed in the P (Park) position.…